Water Quality Automatic Monitoring System

● The system adopts a watchdog anti-crash design to ensure that the product can operate stably and reliably for a long time.
● Support multiple sample retention modes: over-standard sample retention, synchronous sample retention, direct sample retention, external control, etc.
● The database management system can form a historical data table file on the hard disk, which can save at least 10 years of historical data.
● Supports obtaining on-site power supply status. After the mains power is cut off, the entire central control system can work in standby mode for more than 4 hours
● Support single-point control function, capable of debugging a single control point (valve, pump, etc.)
● Supports control functions such as start and stop, time adjustment, calibration, quality control test, etc. of automatic analytical instruments

Specifications

The WQS1000 automatic water quality monitoring system adopts a modular design and occupies a small area. It has front-door maintenance, less waste liquid, and a long maintenance cycle. It can obtain real-time monitoring data of the water environment at the monitoring point in a timely, online, and accurate manner. It can be freely matched according to different water quality monitoring needs.

Additional information

Monitoring Factor

CODmn, ammonia nitrogen, total phosphorus, total
nitrogen, CODcrpH, water temperature, dissolved oxygen,
turbidity, conductivity, algae density, suspended
solids, etc. can be configured as needed

Optional Disposition

Quality control instrument, sample retention module
for exceeding the standard (optional)

Water sample pretreatment

Dosing module/ozone module/UV module (optional)

Water collection method

Dual pumps for water collection, one for backup
and one for use Water pump power>2000W needs
to be configured separately

Dynamic Control

Access control system, smoke detection, water immersion,
temperature and humidityVideo security (optional)

Auxiliary unit

UPS, automatic power recovery, rain shelter, fire
extinguishing device Single voltage regulator
(depending on the on-site power environment)

Communication

4G/Wired Ethernet

Cabinet Features

Constant temperature cabinet

Power supply system

AC 220V±10% ;50/60Hz

Area

0.75㎡

size

1170mmx902mmx2000mm

Work Environment

Temperature -10℃~50℃;
Humidity ≤95%RH (no condensation)

Protection level

IP55 three-level lightning
protection system

Need more information?

Contact us for more details about out solutions and services​